Monday, June 2, 2014

 

Tutorial Konfigurasi MSAN ZTE MSG5200 V2.0.3

/ / 6 comments


(Artikel ini diupdate pada bulan Desember 2020) 

Pada article ini saya akan menjelaskan cara setting atau konfigurasi MSAN ZTE MSG5200, bagi yang belum mengetahui tentang teknologi MSAN, anda dapat membaca artikel saya tentang MSAN (BACA: Mengenal Teknologi MSAN).

PE#6.6.6.6 1123 /vrf MSAN
Trying 6.6.6.6, 1123 ... Open
 ****************************************************************
 *   _______  _________   _______       __       __  __     __  *
 *  |____  / |___   ___| |  _____| ____|  |____  \ \ \ \   / /  *
 *      / /      | |     | |      |  __    __  |  \_\ \_\ /_/   *
 *     / /       | |     | |_____ | |_ |  |__| |   _________    *
 *    / /        | |     |  ____| |____    ____|  |_________|   *
 *   / /         | |     | |           |  |        __    __     *
 *  / /____      | |     | |_____      |  |       /  /   \  \   *
 * /_______|     |_|     |_______|     |__|      /__/     \__\  *
 *                                                              *
 *                        Welcome  to  you !!!                  *
 *                                                              *
 *                        ( MSG5200  V2.0.3 )                   *
 ****************************************************************
Login:root
Password:
 
MSAN00-MSG5200# show system
Name           : MSAG 5200 
Descr          : ZTE ZXA10 SNMPv1/v2c Agent
Contact        : Tel:800 830 1118
Location       : BiBo Rd. 889, Shanghai
identifier     : MSAN00-MSG5200
Multi-Connect  : enable 

PANDUAN KONFIGURASI

Kali ini kita akan membuat service dengan requirement di bawah ini:
  • Port facing to the modem is: Port 0/4/8
  • Port facing to the trunk (Metro/SW): Port 0/7/0 
  • Service VLAN: 3978
Buat port trunk ke Metro-E dan verifikasi status trunk di MSAN.
MSAN00-MSG5200(config)# port enable 0/7/0   
MSAN00-MSG5200(config)# port name 0/7/0 ME-ALU-3/1/1
MSAN00-MSG5200(config)# port duplexspeed 0/7/0 full/1000
MSAN00-MSG5200# show port 0/7/0
portName            : ETH_0/7/0 
portType            : optical_1000M  
manageState         : enable    
portProtect         : disable   
portFlowcontrol     : disable   
ethernetLinkState   : up        
portLinkStatusTrap  : disable   
portRateThresholdTrap: disable   
portRateThresholdValue( %): 100       
duplexspeedConfig   : full-1000M     
duplexspeedState    : full-1000M     
mdi                 : auto      
pvid                : 1         
input rate             : 18.605 Mbps    output rate            : 1.213 Mbps     
input Peak rate        : 50.111 Mbps    output Peak rate       : 4.789 Mbps     
input bytes            : 3315794275478          output bytes           : 147652200902   
input unicastpackets   : 1192936883             output unicastpackets  : 791901617 
input multicastpackets : 1593439016             output multicastpackets: 1106469   
input broadcastpackets : 3023638        output broadcastpackets: 961504 
Buat service VLAN 3978 khusus pelanggan, dan tambahkan VLAN ke port trunk 0/7/0 dan ke port modem 0/4/8 dengan VPI 1 dan VCI 34. 
MSAN00-MSG5200(config)# vlan add 3978
MSAN00-MSG5200(config)# vlan add-port 3978 port 0/7/0 tagged
MSAN00-MSG5200(config)# dsl port atmpvc 0/4/8 pvc 1 vpi 1 vci 34
MSAN00-MSG5200(config)# vlan add-port 3978 port 0/4/8 pvc 1 untagged one-to-one
MSAN00-MSG5200(config)# show dsl port atmpvc port 0/4/8
port      pvcno     PVC(VPI-VCI)                 
--------------------------------------------------
0-4-8     0         0-35
0-4-8     1         1-34
0-4-8     2         0-33
0-4-8     3         6-66
0-4-8     4         7-77
0-4-8     5         9-86
0-4-8     6         9-87
0-4-8     7         0-16

PANDUAN TROUBLESHOOTING

Show VLAN yang baru di create dan periksa apakah sudah di tag ke port Metro-E dan port Modem.
MSAN00-MSG5200(config)# show vlan 3978
taggedport:
(0- 7): 0
untaggedport:(0- 4): 8/1
 
MSAN00-MSG5200(config)#  show dsl port 0/4/8 pvc 1
ManageState         : enable   
pvid                : 3978     
vpi                 : 1        
vci                 : 34       
enpmode             : EOA_LLC  
ingress filter      : disable  
broadcast restrict  : disable  
igmp restrict       : disable  
dhcp restrict       : disable  
bpdu restrict       : disable  
F5TestStatus        : disable  
F5TestResult        : unknown  
adslMaxMacNum       : unlimited
MVR Receive Ports   : no       
input bytes         : 5511711           output bytes        : 5093621  
input packets       : 23677             output packets      : 19945 
Cek status modem dengan menggunakan perintah dibawah.
MSAN00-MSG5200# show adsl port 0/4/8
portName            : ADSL_0/4/8   
portType            : adsl    
dslLinkState        : up      
AtucChanCurrTxRate: : 1248 kbps
AturChanCurrTxRate: : 320 kbps
lastestLinkUpTime   : 2014-05-01 18:06:14
lastestLinkDownTime :
Cek mac-address pada MSAN, apakah sudah terdeteksi antara PE dan CE.
MSAN00-MSG5200(config)# show mac vlan 3978

mac-count-total: 2        
mac-count   macaddress           vlan-id    shelf/slot/port/pvc     state  
--------------------------------------------------------------------------
1           c8:9c:1d:8a:4f:60      3978          0/4/8/1           dynamic  
2           00:1d:70:83:4e:40      3978          0/7/0/--          dynamic
Cek di PE untuk status link point-to-point.. 
PE#show run int Gi1/0/0.3978  
Building configuration...
Current configuration : 373 bytes
!

interface GigabitEthernet1/0/0.3978
 description CUSTOMER
 bandwidth 256
 encapsulation dot1Q 3978
 ip vrf forwarding Customer-VRF
 ip address 172.20.245.133 255.255.255.252
 no ip unreachables
 service-policy input rate_limit_256Kbps
 service-policy output Managed-Package3-Eth-256-parent
end

PE#show ip arp vrf Customer-VRF GigabitEthernet1/0/0.3978

Protocol  Address          Age (min)  Hardware Addr   Type   Interface
Internet  172.20.245.133          -   001d.7083.4e40  ARPA   GigabitEthernet1/0/0.3978
Internet  172.20.245.134          0   c89c.1d8a.4f60  ARPA   GigabitEthernet1/0/0.3978

PE#pi vrf Pelanggan 172.20.245.134
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.20.245.134, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 24/40/96 ms
Cek status line-profile di MSAN, line-profile ini digunakan untuk mengatur bandwidth dan sebagai penyesuaian SNR di modem.
MSAN00-MSG5200# show adsl lineprofile all
All existed Line Profile:
-------------------------
DEFVAL.PRF
DEF2M.PRF
DEF1M.PRF
DEFHM.PRF
111.PRF
112.PRF
113.PRF
114.PRF
115.PRF
IPTV_SD_7M.PRF
P_09216_1280.PRF
P_10752_1280.PRF
P_05632_1024.PRF
P_07680_1024.PRF
P_06656_1280.PRF
P_06656_0768.PRF
P_08704_1280.PRF
IPTV_SD_384K.PRF
IPTV_SD_512K.PRF
P_00768_0192.PRF
P_03072_0768.PRF
P_512_128.PRF
P_07680_1536.PRF
P_1024_256.PRF
P_2048_512.PRF
P_3072_512.PRF
P_05120_1280.PRF
P_01536_0768.PRF
P_384_192.PRF
P_07168_0768.PRF
P_1024_512.PRF
P_00768_0384.PRF
P_07168_1024.PRF
P_01536_0512.PRF
P_04608_1536.PRF
P_07168_1280.PRF
P_04608_0768.PRF
P_05120_0768.PRF
P_03584_1024.PRF
P_00512_0144.PRF
Periksa konfigurasi line-profil di port modem.
MSAN00-MSG5200# show adsl port 0/4/8 line-conf

adsl Line Table
---------------
LineType            : interleavedOnly
LineTypeMode        : byPort   
LineConfProfile     : 113.PRF  
AlarmConfProfile    : DEFVAL.PRF    
shutdown status     : wakeup   
LineTransAtucConfig : Adsl2(fdm)Adsl2+(fdm)G.dmt(fdm)ReAdsl2(fdm)
AdslLinePMConfPMSF  : L2toL0StateForce
linktrap            : inform   
spectrum            : disable 
Periksa line-profil yang digunakan oleh port modem.
MSAN00-MSG5200# show adsl lineprofile 113.PRF
AtucConfRateMode         : adaptAtStartup
AtucConfRateChanRatio    : 0         AtucConfTargetSnrMgn      : 60       
AtucConfMaxSnrMgn        : 310       AtucConfMinSnrMgn         : 0        
AtucConfDownshiftSnrMgn  : 0         AtucConfUpshiftSnrMgn     : 0        
AtucConfMinUpshiftTime   : 0         AtucConfMinDownshiftTime  : 0        
AtucChanConfFastMinTxRate: 0         AtucChanConfInterMinTxRate: 0        
AtucChanConfFastMaxTxRate: 1248      AtucChanConfInterMaxTxRate: 1248     
AtucChanConfMaxInterDelay: 8        
AturConfRateMode         : adaptAtStartup
AturConfRateChanRatio    : 0         AturConfTargetSnrMgn      : 60       
AturConfMaxSnrMgn        : 310       AturConfMinSnrMgn         : 0        
AturConfDownshiftSnrMgn  : 0         AturConfUpshiftSnrMgn     : 0        
AturConfMinUpshiftTime   : 0         AturConfMinDownshiftTime  : 0        
AturChanConfFastMinTxRate: 0         AturChanConfInterMinTxRate: 0        
AturChanConfFastMaxTxRate: 320       AturChanConfInterMaxTxRate: 320      
AturChanConfMaxInteDelay : 8        
AtucDMTConfFreqBins     :05f50313
AturDMTConfFreqBins     :03531323e20525640000000000000000000000000000000000000000000000200000000000000028000010630000000000000000000000000000000000000000
LineDMTConfEOC           : unknown  
ConfProfileLineType : fastOnly 
LineDMTConfTrellis       : unknown  
AtucConfMaxBitsPerBin    : 7680     
AtucConfTxStartBin       : 16       
AtucConfTxEndBin         : 2        
AtucConfRxStartBin       : 0        
AtucConfRxEndBin         : 130      
AtucConfUseCustomBins    : unknown  
AtucConfDnBitSwap        : unknown  
AtucConfUpBitSwap        : unknown  
AtucConfREADSL2Enable    : unknown  
AtucConfPsdMaskType      : 0        
AtucConfPMMode           : L2L3disable   
AtucConfPML0Time         : 32       
AtucConfPML2Time         : 32       
AtucConfPML2ATPR         : 1024     
AtucConfPML2Rate         : 1024     
zxAdsl2ConfMinProtectionDs: minInpAuto    
zxAdsl2ConfMinProtectionUs: minInpAuto 
Periksa SNR dan redaman pada interface modem.
MSAN00-MSG5200# show adsl port 0/4/8 physical-table
adslAtucPhysTable
-----------------
InvSerialNumber     : (co-01234567)  InvVendorID         : FFB54753504E0000
InvVersionNumber    : E.67.1.64 CurrSnrMgn          : 310      
CurrAtn             : 15       
CurrStatus          : noDefect 
OutputPwr           : 113       AttainableRate(kbps): 8064     
AtucPrevSnrMgn      : 0        
AtucPrevAtn         : 0        
AtucPrevAttainableRate(kbps): 0        
adslAturPhysTable

    -----------------

InvSerialNumber     : 000000000000   InvVendorID         : 00005443544E0000
InvVersionNumber    : V.3.11.2.A5    CurrSnrMgn          : 450      
CurrAtn             : 30       
CurrStatus          : noDefect 
CurrOutputPwr       : 118       AttainableRate(kbps): 1024     
AturPrevSnrMgn      : 0        
AturPrevAtn         : 0        
AturPrevAttainableRate(kbps): 0
Ubah line-profil untuk meningkatkan SNR
MSAN00-MSG5200(config)# adsl port lineprofile 0/4/8 112.PRF
MSAN00-MSG5200(config)# show adsl port 0/4/8 line-config

adsl Line Table
---------------
LineType            : interleavedOnly
LineTypeMode        : byPort   
LineConfProfile     : 112.PRF  
AlarmConfProfile    : DEFVAL.PRF    
shutdown status     : wakeup   
LineTransAtucConfig : Adsl2(fdm)Adsl2+(fdm)G.dmt(fdm)ReAdsl2(fdm)
AdslLinePMConfPMSF  : L2toL0StateForce
linktrap            : inform   
spectrum            : disable
Semoga artikel ini bermanfaat ya. Jangan lupa cantumkan sumbernya jika teman teman ini menyalin artikel ini.

6 comments:

  1. UnknownDecember 21, 2015 at 9:12 AM

    Mau tanya nih gan bagaimana cara untuk mengecek Msan itu mati atau hidup, sering kita ketahui bahwa msan itu jika listrik nya mati maka msan akan ikut mati, thx gan

    ReplyDelete
    Replies
    1. Febry Citra Prawira NegaraDecember 10, 2020 at 11:20 AM

      MSAN sendiri memiliki IP Management gan, biasanya IP tersebut di routingkan ke PE, Jump server atau menggunkan monitoring tools seperti CACTI atau PRTG.

      Seharusnya untuk mengecek apakah MSAN mati atau tidak bisa menggunakan PE atau Jump server dengan cara melakukan ping atau dengan membuka aplikasi cacti atau PRTG.

      Delete
  2. Data Mobile PhoneFebruary 8, 2016 at 10:20 PM

    bedanya line profil sama trafic profil apa ya gan ?

    ReplyDelete
    Replies
    1. Febry Citra Prawira NegaraDecember 10, 2020 at 11:23 AM

      Sepemahaman saya, traffic-profile adalah traffic maksimum yang di set pada port di GPON/MSAN jadi walaupun line-profilenya 100M jika traffic profilenya 1M, maka maksimal bandwidth yang didapat hanya 1Mb

      Delete
  3. AnonymousJanuary 18, 2017 at 10:20 AM

    mau tanya min... klo system config dari master control gisb bisa ga di kopas ke control slave...gimana ya caranya tqs

    ReplyDelete
  4. Febry Citra Prawira NegaraDecember 10, 2020 at 11:26 AM

    Mohon maaf gan, saya kurang tau untuk pertanyaan tersebut.

    Mungkin ada agan lain yg bisa menjawab.

    ReplyDelete